Plastic Beads PE Extrusion Equipment Manufacturer for Making Granules
Model No.: TSE
1, Fibre reiforcement : glass fibre, carbon fibre reinforced PP, PA, PBT, ABS, PC, POM, PPS, PET, etc.
2, Polymer blending:blending of PC/ABS, PA/ABS, CPE/ABS, PP/EPDM, PA/EPDM, PP/SBS,etc.
3, Incorporation of Fillers: Caco3, Talc, TiO2, carbon black,filled PE, PP, or EVA, etc.
4, Cable Compounds: cable sheath, cable insulation compounds of LDPE, HDPE, LLDPE, MDPE; radiation-crosslinkable compounds, optical fibre protection compounds, heat-shrinkable polymer compounds.
5, Special Compounds: PPR pipe compounds, PE compounds for crosslinked pipes, tobacco filter compounds, etc.
6, High Concentration Color Masterbatches: PE, ABS, PS, EVA, PP,etc. with high concentration of pigments and other processing aids.
7, Masterbatches with Flame-retardants: PE, ABS, PS, EVA, PET, PP, etc. with flame retardants and other additives.
1) Screw diameter : 71mm. L/D= 36:1/40:1/44:1/48:1
2)Main drive motor :AC 132kw,speed regulated by ABB transducer inported from switzerlad
3)Screw rotary speed:50~600rpm
4)Screw shaft is made of high-strength alloy 40CrNiMoA.
5)Lenght of each barrel is 290mm,totally 9 pieces of barrels
6)The 1st barrel is the main feeding vent,the 5th is for degassing,8th is vacuum section,and the others are closed barrels.
7)Casting copper heaters for 2.3th barrels.The others are equipped with casting aluminum heaters,All heating power:~50 kw
8)Reducing and distributing gearbox:
The gearbox reduces the motor speed to the speed of the screw shafts and distributes it to the 2 output shafts,
this gearbox output torque can reach 4.8T/A3
The gearbox consists of:
l Involute gear teeth couplings between the output shaft and screw shafts
l Integrated thrust bearing assembly,radial bearings of the output axis are NSK products
l Bottom part of casing designed as oil sump
All our products are packed witjh wooded cases or as customers required
Haisi Service Stystem
*Introduce products in detail
*Recommend suitable solution
*Provide layout and engineering conditions
*Offer screw plan and related documents
*Inform the project processing status
*Insure the product designed in accordance with technical document
*Provide installation, commissioning and training
*Offer spare parts
*Provide necessary techinical support and update infoamation
If you have any questions, pleasedon't hesitate to contact me or send an inquiry to me!
2. Loader 3. Main feeder 4. Side feeder( for short fiber) 5. Long glass fiber 6. Twin Screw Extruder 7. Water trough 8. Air knife 9. Pelletizer 10. Product hopper
Besides the twin screw extruder, Haisi supplies all the auxiliary machines and spare parts.
|Diameter||L/D||Screw rotary||Motor Power||Torque||Capacity|
Product Categories : Co-Rotating Twin Screw Extruder
Premium Related Products