Unique Element Design Coalescing Air Filter
|Productivity:||500pcs per day|
|Place of Origin:||CHINA|
|Supply Ability:||500pcs per day|
Model No.: DT014
Compressed air in industrial applications contains in 1Nmᶟ more than 100 million of polluting articles. Most of these particles are so small in dimension, less than 5 micron, that they cannot be intercepted by the standard intake filters installed in the compressors. Such particles, mixed with water and oil vapour generated during compression, cause the early wear and tear of the appliances and consequently they are the cause of expensive interruptions of the production and remarkable increase maintain.
Selection right compressor air dryer filters will allow the best choice of the suitable equipment according to the quantity of air to be treated and the necessary filtration degree in order to increase and improve the performances of the whole system.
Feature & Advantage
①Casing 100% Leakage-tested, with 15 years spanlife. Low overall cost for owner.
②No-touch Element design, easy to maintenance and repairement.
③Follow ISO8573.1-2010 Standard in Class 1 filtration performance. Protect your precise equipment and optimization your production efficiency.
④Low pressure drop, saving energy and money.
For more questions about how to choose a particle air filter for your compressed air system, how to maintain the air compressor filter in daily, how long the coalescing air filter should be maintained, and how the compressor air filter works, please contact us by email or phone.
Installation method of compressed air filter
①Clean the compressed air pipes and valves connected to the air inlet and outlet of the filter before installation.
② Adopt the combination of main pipe filtration and terminal filtration to ensure the gas quality at the point of use.
③ When installing, the air inlet and outlet of the filter should be kept level, and the sewage outlet should be at the bottom. A certain space must be reserved in the vertical direction to facilitate the maintenance of the filter and the replacement of the filter element.
④The filter of the screw air compressor should be installed in a ventilated and cool place, as close as possible to the air point, to reduce the influence of the pipeline on the quality of the filtered compressed air.
⑤ Install and use within the specified working pressure and working temperature range, and install all levels of filters in the correct order according to the air inlet and outlet instructions or the direction indicated by the arrow, from coarse to fine installation. Avoid bypass as much as possible during installation. Because the oil in the air is bypassed to the downstream of the filter and then sticks to the inner wall of the pipeline, it is difficult to find effective means to remove it.
6. The filter element should be replaced regularly. Carefully record the replacement time. It is recommended that the working time zone should not exceed 6000 hours.
7. The discharge time of the auto drain is suitable for draining the liquid water, and the discharge interval is subject to the water content in the pipeline;
8. Different grades of compressed air filters can be equipped with zero pressure loss floating ball drain valves or manual valves according to customer requirements.
|Model||Pipe size||Flow rates||Dimension (mm)|
|L/S||m³/min||scfm||W (Width)||D (Depth)||H (Height)||A||B||C (clearance for housing)|
|Technical requirements||Maximum operating pressure: 10 barg Maximum operating temperature: 80°C Minimum operating temperature:1.5°C|
Replacement and Spare Parts
Hongrijia Depurate Facility Science & Technology Co.,Ltd
Hongrijia Purification Equipment Technology Co., Ltd. was founded in 1998 and is located in Shenzhen, Guangdong Province. Own brand YUKA and has branches in Huizhou, Tianjin and New Delhi, India, with a total production area of 20,000 square meters.
As a well-known manufacturer of compressed air drying, filtering and separation equipment in China, YUKA is focusing on R&D, production and sales of high-quality compressed air treatment and purification equipment, breaking the situation that China's compressed air filtration and separation technology is occupied by foreign markets. Provide high-quality products and services for industries that need compressed air as a source of power.
Our product types include compressed air refrigeration air dryer (dew point: 2℃~10℃), adsorption air dryer (dew point: -20℃~ -70℃), high-efficiency compressed air filter, cyclone gas-water separator, oil and gas separator , compressor air filter, oil filter, alternative filter element, floating ball automatic drain and accessories.
The star products are HLX series drying and filtering in one refrigeration dryer, GHF series 30bar high efficiency compressed air filter, G-BHL series 60bar stainless steel compressed air filter, HF series and YD series compressed air filters, etc. . The products have obtained a number of national invention patents, utility model patents and appearance design patents. Widely used in military, medical, semiconductor, optoelectronics, nuclear power plants, aerospace, food, beverages, spray coating, laser cutting, chemicals, metallurgy, transportation, electronics, machinery manufacturing, glass, cement, automation, medical treatment, semiconductors, nuclear power plants and aviation And other fields.
YUKA always adheres to quality as the core, and continues to provide customers with high-quality pre-sales, sales and after-sales services, and provides clean, dry, high-quality compressed air for industrial applications, reduces energy consumption, saves production costs, and improves product qualification rate.
- Company Name: Hongrijia Depurate Facility Science & Technology Co.,Ltd
- Representative: Liu Bai Fan
- Product/Service: Compressed Air Dryer , Compressed Air Filter , Air Water Separator , Condensate Auto Drain , Air Filter Element , Differential Pressure Gauge
- Capital (Million US $): US$ 5 Millions
- Year Established: 1998
- Total Annual Sales Volume (Million US $): US$50 Million - US$100 Million
- Export Percentage: 21% - 30%
- Total Annual Purchase Volume (Million US $): US$10 Million - US$50 Million
- No. of Production Lines: 10
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 10,000-30,000 square meters
- Factory Location: 6th Floor, Block H, No. 8, Qinglan 1st Road, Pingshan District, Shenzhen
- Contact Person: Ms. YUKA
- Tel: +86-0755-28686438
Premium Related Products